LT-light.com   Because your success are ours       Home About Us Products Support Distribution Order Contact         Products : Totem Totem 12 Channels x 3 Kw. 6 Channels x 6 Kw. 3 Channels x 12 Kw. Menu   ::  FUNCTIONALITIES   ::  CHARACTERISTIC FUNCTIONALITIES [ Back ] The soft keys, one per channel, can be: Flash, Switcher, or Dimming for channels, and GO function for the temporised special Memories. These keys can be disabled. One LED per channel, as intensity flag. Display and 3 functions keys for menus edition and information accessing. Patch, linear or channel by channel (1024 directions). Response Curves generic or channel by channel (5 available). 9 Backup memories, with time-in, or last DMX signal maintenance. "AL" function: Memories with their times that can be executed by the frontal keys or by the external panel connected to its 0+10V input. These memories can have Attributes of priority, solo, etc. (12, 6 or 3 available, depending of the Totem model). Voltmeter per phase input and Thermometer. Totem controls the connections number and the working hours. 8 working modes of MIDI. Set up for the MIDI channel, and the MIDI Controller/Note. It is possible to connect a keyboard, a sequencer, etc. to the dimmer directly. Menus to test the input and output buffers, the control source of each channel, etc. Luminaries protection with a delay time (30...500 ms.) in the quick rises. Slow rearm in the Switching On, to permit us switch on the dimmer to full load.   [ Back ] CHARACTERISTIC [ Back ] 3 control signal inputs that can work simultaneity: DMX, 0+10V, MIDI. Amecon Chokes: 303 µs. (3 Kw.), 378 µs. (6, 12 Kw.) DPN protection (3 Kw.) or Bipolar protection (6, 12 Kw.) 95A Thyristor Pack (Mod. 3 channels) and 60A  Thyristor Pack (Mod. 6 channels). 25A Triac in Mod.12 channels. (Optionally 25A thyristor pack). Fan ventilation and temperature control, with alert and disconnection thresholds. Voltage control, with alert and disconnection thresholds. Phase feedback per input phase. Software control of the electronic noise in the main phase inputs. Automatic adjustment of the working frequency (40 - 75 Hz.). The response curve is maintained with the input frequency modifications. Power supply: Harting connector, 4 x 80 A. + G. 380V3~ , 40-75 Hz, 12Kw/phase. Power outputs: Harting connector, 24 x 16A. (3 Kw.), 2 Harting connector, 6 x 35A. (6 Kw.), or Harting connector, 7 x 100A. (12 Kw.) 2 XLR-5. DMX in, thru. 1 SubD-15. Analog in. 1 DIN-5. MIDI in. Size in mm. (width x depth x height): 483 (19'') x 435 (without handless) x 176 (4U). Weight: 25 Kg.   [ Back ]   Secciones Product Home Product Sheet Catalogue Software & Manual Images   © 1993 -    LT-Light